Cornhole Board is an amazing outdoor and traditional game that gives you a great time with your friends if you plan for a barbeque party. If you don’t have a cornhole board, don’t worry; you can make it alone. If you are eager to make your cornhole board, you may need to know the adequate cornhole board dimensions to enjoy your gameplay perfectly.
Knowing the correct cornhole board dimension is important while making it at home. But it is also important when you want to buy a new one because dimensions are very important for the authenticity and enjoyment of the game.
In this guide, we will discuss the correct cornhole board dimensions, the right weight, and other important aspects so that you can get a comprehensive understanding of the cornhole board.
What are Cornhole Court Dimensions?
The first and most important thing is the court dimension where you want to place the cornhole board. It is important to know at which distance you may need to put these boards for good gameplay.
According to the official guideline, the distance between the cornhole boards must be up to 27 feet from one edge to another. Nevertheless, most individuals prefer a distance of about 24 feet, especially when playing with “tailgate” cornhole boards.
You may need to remember that juniors must keep a distance of up to 21 feet from the cornhole board edge where they want to aim for.
Official Cornhole Board Dimensions
The standard dimensions for ACO-approved cornhole boards are as below.
- The measuring playing surface of the hardwood plywood is 47.5″ to 48″ x 23.5″ to 24″
- The minimum thickness of the playing surface with cross-section backing must remain 1/2″. But without cross-section backing, the thickness must be 3/4″.
- The diameter of each hole on the board is 6″ and centered from the sides and top of the board is up to 9″.
- The height of the upper surface of the board from the ground or playing area of the board ranges between 3 to 4 inches.
- The back of the playing board ranges from the ground to 12″.
- Another important thing you may need to consider is the surface finish which should be smooth. There should be no small blemish on the surface; otherwise, it may disrupt your game.
- You can paint the playing surface with high gloss paint or varnish. It will help the bags to slide when you throw them. But don’t make it too slippery, as bags may slide down from the platform.
You may need to consider these basic requirements while making or buying a cornhole board. Let’s discuss them in detail to understand them in a better way.
Requirements for Cornhole Board Dimensions
Here is some basic need that a good cornhole board fulfills. You must remember these requirements while making or buying the board.
Playing Surface Dimensions
Another name for the top surface of the cornhole board where the bean bags land is the playing surface. You may be surprised that the cornhole boards are not exactly 24 by 48 inches, as they have approval from the official ACO.
However, it is still a standard number you may find in most of the cornhole boards. Moreover, it is 1,000 times easier to find pre-cut plywood to make a 48 by 24 inches board.
If you prefer portability, you should consider having a tailgate-sized cornhole board. Tailgate cornhole boards are the same width but up to three feet long. Their size makes them portable and easier to store than regular boards.
The best part is that tailgate cornhole boards are also cheap. You can easily find their online stores like Amazon.
Playing Surface Thickness
The minimum thickness of the playing surface should be 1/2 inch with cross-section backing. You can also keep it with or without cross-section backing up to 3/4 inches.
The most important thing you must remember is that the board’s surface doesn’t bounce. The quality surface of cornhole boards doesn’t bounce or bounce very little, so reduce the bouncing as much as you can.
Cross-section backing is a support bar that passes through the middle of the board and meets one end to the other. It is also important to know that if you keep the thickness up to 1/2″, you may need to add cross-section backing. Otherwise, you may experience bouncing, which distorts your game.
However, some people add an extra support bar, while others don’t add a single one. So it is up to your preferences, and you can reduce or increase the support bars.
Weight of the Cornhole Board
Another important thing in the cornhole board dimension is the weight. It is important to know that the boards in the set should weigh up to 25 lbs.
However, remember that these are the minimum requirements and not the maximum. When you add multiple support cross-sections and choose a thickness up to 3/4″ of the playing surface, you should meet this need.
But at the same time, you may need to think about portability because a thick cornhole board will be heavy enough, and you cannot bring it anywhere you want. So consider the standard dimension and keep your cornhole board sturdy, not heavy.
Hole Diameter
Another important thing in a cornhole board is the hole diameter. The diameter of the cornhole board remains 6″, and keep it centered from the sides and top of the board at 9 inches. Remember that diameter is the distance of the circle from the sides of the cornhole board, and don’t mix it with the radius, which is half of the diameter.
Front and Back of the Cornhole Board
The height of the front side of the cornhole board from the playing area should range between 3 to 4 inches. However, the height of the board also depends on the thickness of the board you choose. Most of the users consider 2 x 4 inches for the frame of the cornhole board.
The height of the back of the board from the ground should remain 12″ to enjoy your game.
Smooth Finish
Keep the surface from sanded to smooth texture because a little flaw can ruin your game. It is important to sand the boards as much as possible because the bean bags need to slide on the surface while playing on the cornhole board.
Keep things smooth, especially the hole where you want to through the bean bags to get more points. If there is any board flaw, your game will be affected.
You can also paint the surface with high gloss or varnish to make it smooth. It will help the bags to slide around on the playing surface. However, it is important to remember that don’t make the surface too slippery; otherwise, the bean bags will slide down from the platform.
So it is good to paint the surface primer and again sand it slightly. It will make the board more nice and smooth, and the other layers will give it a more sleek finish.
Cornhole Bag Dimensions
Now you get everything about the cornhole board dimensions, which is very important to enjoy your game. But another thing that you cannot neglect is the cornhole bags that need your attention for correct dimensions.
Ensure that the cornhole bags range 6 by 6 inches in dimension and contain weight between 15 to 16 ounces. They should contain a certain material and be stitched in a certain way to make them perfect for the throw.
Final Words about Cornhole Board Dimensions
We hope this guide gave you an exact idea about the correct Cornhole Board dimensions. You can make a new board using these dimensions or buy the right-sized board from the market after knowing the board’s exact dimensions.
For most people, regular-sized boards are best. They go for 24 by 48 inches. However, some people prefer tailgate cornhole boards as they are portable and more affordable. So it is up to you which one can fulfill your gaming needs.
